Action Back, Attached Cushion, HPS Backing System, UPS Backing System, UPS Block Backing System, Weldlock, Weldlock Plus, Woven and Woven Interlock

Installation Guidelines for Direct Glue-Down Installation Unibond RE Carpet (Pattern & Non-Pattern)

Action Back, HPS Backing System, UPS Backing System, Weldlock, Woven and Woven Interlock

Installation Guidelines for Corridors and Broadloom
Durkan’s Technical Installation Support Department is available for your assistance. Before or during installation, if any problems occur, or if you have any questions, please call 800-833-6954. Durkan highly recommends the use of a Durkan Certified Installer.

Ecoflex™ Urethane Cushion Backed
Carpet Tiles
PVC Backed Carpet Tiles
Thermoplastic Backed Carpet Tiles
Self Lock® Carpet Tiles

• Store adhesive at a minimum temperature of 68° F (20° C) for 24 hours prior to installation.
• Condition flooring per manufacturer’s recommendations.
• Ensure substrate, flooring and surrounding areas are clean and dust free.
• Damp-mop substrate if dust is present.
• Only use Portland based patching and leveling compounds.
• Shake aerosol can

• Store adhesive at a minimum temperature of 68° F (20° C) for 24 hours prior to installation.
• Condition flooring per manufacturer’s recommendations.
• Ensure substrate, flooring and surrounding areas are clean and dust free.
• Damp-mop substrate if dust is present.
• Only use Portland based patching and leveling compounds.
• Shake aerosol can

• Store adhesive at a minimum temperature of 68° F (20° C) for 24 hours prior to installation.
• Condition flooring per manufacturer’s recommendations.
• Ensure substrate, flooring and surrounding areas are clean and dust free.
• Damp-mop substrate if dust is present.
• Only use Portland based patching and leveling compounds.
• Shake aerosol can

• Store adhesive at a minimum temperature of 68° F (20° C) for 24 hours prior to installation.
• Condition flooring per manufacturer’s recommendations.
• Ensure substrate, flooring and surrounding areas are clean and dust free.
• Damp-mop substrate if dust is present.
• Only use Portland based patching and leveling compounds.
• Shake aerosol can

Lees Self Lock Tile Adhesive is a releasable, pressure sensitive adhesive specially engineered to install carpet tiles in a grid or total glue down installation. This premium adhesive is formulated to facilitate release and re-bonding of carpet tiles while permanently retaining its tack, allowing individual tiles to be lifted out easily and replaced without substantial loss of adhesive properties.

    MSDS

Tackless Installation
Action Back, HPS Backing System and UPS Backing System

Recommended Adhesives
TMG Enpress PSA Adhesive is recommended to adhere the pad to the subfloor. The approximate spread rate is 40 yards per gallon. Lees WetSet Adhesive or NuBroadlok Adhesive is recommended to adhere the carpet to the pad. The approximate spread rate is 6-7 yards per gallon.

(view pdf)