 |
|
 |
 |
The Mohawk Group enpress™ pressure sensitive adhesive is specially designed to install The Mohawk
Group carpet tiles and six-foot rolls. enpress™ pressure sensitive adhesive is nonflammable and has low odor
and “zero” calculated VOC’s, which makes it ideal for use in schools, health care facilities, public buildings, and
anywhere odor is a concern. enpress™ pressure sensitive adhesive is CRI Green Label Plus approved. This
adhesive also meets or exceeds California requirements as specified in Rules 102 and 443 as well as California
SCAQMD Rule 1168. This adhesive contains MicroSept™ broad spectrum antimicrobial protection.
MSDS

|
 |
 |
Description: Everseal is a penetrating as well as a film-forming modified acrylic compound to
be used to protect concrete substrates with in-situ Relative Humidity readings up to 85% per
ASTM F2170, and alkalinity up to a pH of 11.0. It may also be used to treat dusty or porous
substrates for a better bonding surface. Everseal is nonflammable and dries to a clear film that
is alkali, plasticizer, and water-resistant. To clean up while wet, use soapy water; when dry, use
of a solvent may be required. Containers must be kept tightly closed. Protect from freezing.
MSDS

|
 |
 |
The Mohawk Group NuBroadlok™ Premium Multi-Purpose Adhesive is a fast-grabbing, high
solids, commercial carpet adhesive for use with all Mohawk broadloom carpets with the exception
of Lees Unibond or U2. NuBroadlok™ is the perfect choice for heavy duty installations. This low
odor adhesive provides quick tack as well as excellent re-tack properties. NuBroadlok™ is CRI
Green Label Plus approved.
MSDS

|
 |
 |
NuBroadlok™ Solvent-Free Carpet Seam Sealer is recommended for seaming polypropylene,
jute, urethane, latex unitary carpet and woven backed and vinyl backed edges. It prevents
unraveling and/or delaminating of carpet backings and yarns. NuBroadlok™ Solvent Free Carpet
Seam Sealer can be used for direct stick and conventional stretch-in installations and is resistant
to mildew, fungus and professional carpet cleaning.
MSDS

|
 |
 |
NuBroadlok™ Latex Carpet Edge Sealer is a natural latex adhesive designed for sealing raw
carpet edges, replacing damaged or burned nap, strengthening worn backings and joining
padding. NuBroadlok™ Edge Sealer is extremely fast drying, easy spreading, and nonflammable.
Bonding strength increases with age and will not deteriorate after shampooing.
MSDS

|
 |
 |
Engineered with ergonomics in
mind, NuSpraylok’s 22 oz. can
allows for a more comfortable
application—no more bending
over. This easy to use adhesive
allows for immediate access
to all floor traffic.

|
 |
 |
• Store adhesive at a minimum temperature
of 68° F (20° C) for 24 hours prior to
installation.
• Condition flooring per manufacturer’s
recommendations.
• Ensure substrate, flooring and surrounding
areas are clean and dust free.
• Damp-mop substrate if dust is present.
• Only use Portland based patching and
leveling compounds.
• Shake aerosol can
MSDS

|
 |
 |
• Store adhesive at a minimum temperature
of 68° F (20° C) for 24 hours prior to
installation.
• Condition flooring per manufacturer’s
recommendations.
• Ensure substrate, flooring and surrounding
areas are clean and dust free.
• Damp-mop substrate if dust is present.
• Only use Portland based patching and
leveling compounds.
• Shake aerosol can
MSDS

|
 |
 |
* These products may be installed using more than one installation format depending on the look that
the end user or designer wishes to achieve. Please review the product list under each of the above
formats and consult job specifications or the end user to determine which installation format should
be used for a particular project. If you have any questions about any of the installation formats, please
contact Field Technical Service at 1-800-833-6954 for more information.
MSDS
(view pdf)
|
 |
 |
The PermaLink System is solvent free adhesive tape used for the installation of Mohawk Group carpet tiles over existing glue-down carpet. The adhesive contains no solvents, chloride, formaldehyde additives, or toxic ingredients. It will not crack with age, but remain dimensionally stable.
(view pdf)
|
 |
 |
Description: PrimeCoat is a topically applied modified acrylic floor primer used to treat dry, dusty or
porous substrates for a better bonding surface and to help ensure proper adhesive bond. PrimeCoat
may also be used to prime gypcrete surfaces and to de-tack adhesive residues. Apply one coat of
PrimeCoat with a 3/8” nap roller as an even coat over the entire surface of the floor at a rate of 35 – 40
square yards per gallon. Allow the floor to dry completely after application.
MSDS

|
 |
 |
Lees Self Lock Tile Adhesive is a releasable, pressure sensitive adhesive specially engineered to install
carpet tiles in a grid or total glue down installation. This premium adhesive is formulated to facilitate
release and re-bonding of carpet tiles while permanently retaining its tack, allowing individual tiles to be
lifted out easily and replaced without substantial loss of adhesive properties.

|
 |
Mohawk Group SureSeal is a light-colored high strength acrylic based compound formulated to isolate
cutback and other types of old adhesive residues. SureSeal will also improve dusty and porous floors to
provide a clean surface for better adhesive bonds. It contains “zero calculated” VOC’s and does not contain
any known hazardous materials.
MSDS

|